The Right Way to Maintain a Commercial Pool

Commercial PoolThe maintenance of a commercial pool is a heavy duty. The safety and health of the swimmers largely depends on the care of equipment and correct water balance. Lack of maintenance leads to spending of a huge amount of money in repairing and maintenance causing potential loss of clients! Commercial swimming pool equipment is costly and requires time to time maintenance. However, these steps shall help you follow the sequence in the right order:


Stage 1:

The pump and filter is the heart and soul of your pool. The water of the pool needs to be circulated and distilled regularly, especially for those commercial pools which have bather loads. The pump stainer should be cleaned periodically, seals and worn gaskets should be replaced and a flowmeter should be used to assure the gallons per minute are right for the swimming pool.

Stage 2:

Regardless of the kind of filter you’re using on your commercial pool, periodic maintenance of the filter and media is important. Check the cartridges to ensure they are in the right condition without holes to clean debris. Backwash the sand filters for efficient channeling. With compromised filters, the water quality will depreciate.

Stage 3:

Chemical level maintenance is yet another important aspect. It is important to maintain the right balance of water because commercial pools have a big traffic. The installation of a chemical automation system eases the maintenance of water sanitizer level. As per the system, you can measure the ORP, pH ad sanitization levels and accordingly dispense the chemical needed to balance the pool.

Step 4:

Another idea for commercial pool cleaning is to use a salt chlorine generator. These systems make use of salt in the pool to make chlorine. With the help of power supply, enough chlorine is generated to maintain the bather load of the commercial pools.

:Stage 5

When salt chlorine system and chemical automation machines are out of your budget, you can go for simple pool sanitization by going for a commercial pool chlorinator. The plastic equipment has chlorine tablets along with valve to manage the flow of chlorinated water in the pool.

Stage 6

Commercial pool chlorinators are designed for large size pools with a lot of bather load because of the higher number of chlorine tablets they hold. They do not need an electric connection to sanitize the pool.

Stage 7

When all the equipment run good and the chemical levels are balanced, you still need to clean your pool. Commercial pools accumulate a lot of debris daily. Make use of vacuum to clean it. You can also invest in commercial robotic cleaner to go for automatic pool cleaning.

Stage 8

Roof repair demands equal attention. A great care needs to be paid for the maintenance and time to time repairing of the roof. Pools get a lot of dirt and debris from upside. Thus, a perfect roof cover and its time to time care is very important for the efficient sanitization of the pool.

When you follow these stages, your pool will never be dirty!

Share this post